Contour Next One Meter Error Codes: Full List + Quick Fixes
Table of Contents
- Understanding Contour Next One Error Codes
- 3 Types of Contour Next One Meter Error Codes
- Contour Next Strip Error Codes – E1 to E8
- Contour Next One Meter Testing Error Codes – E20 to E28
- Contour Next One Meter System Error Codes – E30 to E99
- How to Avoid Contour Next One Meter Error Codes
- Contour Next One Meter Error Codes: Additional Tips
- Contacting Contour Next Customer Service – Checklist
- Contour Next One Meter Error Codes: A Final Word
- Guides to Using Contour Next Test Strips
- Products Mentioned in This Blog Post
- About xeteor.com
- FAQs
Understanding Contour Next One Error Codes
Contour Next One Meter error codes can be confusing, but understanding what they mean is key to accurate blood sugar readings and better diabetes management. In this guide, we’ll explain the most common Contour Next One Meter error codes—like E1, E2, E8, and more—and show you how to fix them quickly. You’ll also find tips to prevent these errors from happening again, all based on information from the official Contour Next One Meter User Manual.
3 Types of Contour Next One Meter Error Codes
- Strip Errors: These occur when there’s a problem with the test strip—such as it being inserted incorrectly, damaged, or reused.
- Testing Errors: Often related to environmental factors like temperature being too high or low during testing.
- System Errors: These indicate an issue with the meter’s internal hardware or software, and may require a reset or contacting support.
Contour Next Strip Error Codes – E1 to E8
Error Code E1 – Too Little Blood: This error appears when you haven’t applied enough blood to the test strip. Remove the strip and try again with a new one, ensuring you apply a sufficient sample.
Error Code E2 – Used Test Strip: The E2 code means the meter has detected a used strip. Always use a fresh, unused Contour Next test strip for accurate readings.
Error Code E3 – Strip Inserted Upside Down: If the strip is inserted incorrectly (usually upside down), the meter will show E3. Remove the strip and reinsert it with the contact bars facing up.
Error Code E4 – Wrong Test Strip Type: E4 means the test strip is not compatible with the Contour Next One Meter. Only use Contour Next test strips. For more info, see our guide on Contour Test Strips Compatibility.
Error Code E6 – Moisture-Damaged Strip: This error occurs when a test strip has been exposed to moisture and is no longer reliable. Discard the strip and use a new, properly stored one.
Error Code E8 – General Strip or Testing Error: E8 is a catch-all error. Try retesting with a new strip. If it happens again, contact Customer Service for assistance (see contact info below).
Contour Next One Meter Testing Error Codes – E20 to E28
Error Code E20 – General Testing Error: E20 usually appears when there is a problem during the testing process. Remove the strip, insert a new one, and retest. If the issue continues, restart the meter or contact Customer Service.
Error Code E24 – Too Cold for Control Solution Test: The meter, strip, or control solution is too cold for accurate testing. Move everything to a warmer room and wait 20 minutes before retesting.
Error Code E27 – Too Cold for Testing: The environment is too cold to perform a blood glucose test. Allow the meter and strip to reach room temperature, then try again after 20 minutes.
Error Code E28 – Too Hot for Testing: The meter or test strip is too warm. Relocate them to a cooler area and wait at least 20 minutes before testing again.
Need strips fast? Browse all Bayer / Ascensia test strips and accessories on our site—no insurance needed, always free shipping on multi-packs.
Contour Next One Meter System Error Codes – E30 to E99
Error Codes E30–E99 – Meter Malfunction: These system error codes signal a malfunction in the meter’s internal hardware or software. To troubleshoot:
- Turn the meter off, wait a few seconds, and turn it back on.
- Try testing again with a new strip.
- If the error continues, contact Contour Customer Service for further assistance.
How to Avoid Contour Next One Meter Error Codes
Now that you understand what the error codes mean, here are simple steps you can take to avoid the most common Contour Next One Meter errors:
- Use the correct test strips: The Contour Next One Meter only works with Contour Next test strips. Using other types may cause error messages or inaccurate readings.
- Store strips properly: Keep your test strips in a cool, dry place. Avoid heat, humidity, or direct sunlight, which can damage the strips and cause errors like E6.
- Always use a new strip: Never reuse a test strip. Doing so can result in E2 or incorrect readings.
- Apply a sufficient blood sample: Too little blood may trigger an E1 error. Wait for the meter to prompt you before applying blood.
- Insert strips correctly: Insert the strip with the contact bars facing up and fully into the port to avoid E3 errors.
- Wait for the beep before removing: Don’t remove the strip too early—wait for the meter to finish the test to prevent incomplete results.
- Clean your meter regularly: Gently wipe the meter with a soft, damp cloth to keep the sensor area free from residue or dust.
Contour Next One Meter Error Codes: Additional Tips
- Wash your hands before testing: Clean hands help prevent contamination and ensure a more accurate reading.
- Choose a clean, dry finger: Avoid fingers that are wet, swollen, or have cuts or wounds.
- Prick the side of your fingertip: This area is typically less sensitive and causes less discomfort.
- Massage your finger gently: This encourages blood flow and makes it easier to obtain a sample.
- Apply blood to the strip immediately: Don’t let the sample dry out—apply it right after pricking for best results.
Following these additional tips can help you avoid unnecessary error codes and improve the accuracy of your Contour Next One Meter readings.
Contacting Contour Next Customer Service – Checklist
If you're experiencing issues with your Contour Next ONE Meter and need additional help, you can reach Ascensia Diabetes Care at:
📞 Phone: 1-800-348-8100
🕒 Hours: Monday to Friday, 8:00 AM – 12:00 AM (Midnight) EST
🌐 Languages: Support is available in both English and Spanish.
To make your support call go smoothly, have the following information ready:
- Your Contour Next ONE Meter, Contour Next test strips, and control solution
- The meter’s model number and serial number (usually found on the back)
- The expiration date on your test strip bottle
- The meter’s battery status
Contour Next One Meter Error Codes: A Final Word
Understanding Contour Next One Meter error codes—and knowing how to fix them—can go a long way in ensuring reliable and accurate blood glucose readings. By recognizing what each code means and how to respond, you’ll be better equipped to avoid disruptions in your testing routine.
If you continue to experience issues or need help with a specific error, don’t hesitate to contact Contour Customer Service for expert support. Accurate readings are essential for effective diabetes management, and being prepared helps you stay in control.
If you're shopping for Contour Next test strips, be sure to check out our full selection of Bayer / Ascensia diabetes care products. We offer reliable options at lower prices than most retail stores—with no insurance required.
Guides to Using Contour Next Test Strips
Products Mentioned in This Blog Post
Bayer Ascensia Contour Next 50 Blood Glucose Test Strips

$27.99
Ascensia Contour Next 50 Blood Glucose Test Strips – 7311 (Replaces 7308 & 7309) Looking for Contour Next 7308 or 7309 test strips? Those boxes...… read more
Ascensia Contour Next 50 Blood Glucose Test Strips (2 Pack)

$53.98
Ascensia Contour Next 50 Blood Glucose Test Strips (2 Pack) What will I receive? 2 boxes of Ascensia Contour Next 50 Test Strips (TOTAL: 100...… read more
Ascensia Contour Next 50 Blood Glucose Test Strips (4 Pack)

$99.96
Ascensia Contour Next 50 Blood Glucose Test Strips (4 Pack) What will I receive? 4 boxes of Ascensia Contour Next 50 Test Strips (TOTAL: 200...… read more
Ascensia Contour Next 50 Blood Glucose Test Strips (6 Pack)

$147.96
Ascensia Contour Next 50 Blood Glucose Test Strips (6 Pack) What will I receive? 6 boxes of Ascensia Contour Next 50 Test Strips (TOTAL: 300...… read more
Ascensia Contour Next 50 Blood Glucose Test Strips (12 Pack)

$287.88
Ascensia Contour Next 50 Blood Glucose Test Strips (12 Pack) What will I receive? 12 boxes of Ascensia Contour Next 50 Test Strips (TOTAL: 600...… read more
About xeteor.com
xeteor.com, started in 2018 is based in Las Vegas, Nevada and is online pharmacy focusing on discount over-the-counter generic medications and diabetic test strips. We find deals normally reserved for "big pharma" and offer them to the consumer at discount prices. Ranking as the #1 authorized online reseller of Rugby Laboratories products according to Trustpilot.com, xeteor.com has 8,000+ 5-star reviews online, including Amazon, eBay, Trustpilot, and Google. xeteor.com is a Google Top Quality Store, earned by merchants that provide a great shopping experience.
Shipping Time & Cost
All items ship same day when purchased by 3 pm PST Monday - Friday. We offer free shipping nationwide on orders over $30 and savings packs. Shipping times are between 3 to 8 business days, with an average of 3.3 business days. A link to our full shipping policy is here.
Payment Options
We offer multiple convenient payment options, including Visa, Mastercard, Discover, American Express, Google Pay, Apple Pay, PayPal and Venmo.
Return Policy
We offer a 100% satisfaction guarantee. If you are not satisfied with the product, you may return it up to 100 days from the date of purchase. We offer free return shipping to ensure you can try the product risk free. A link to our full return policy is here.
How to Reach Us?
If you have questions about the product or need assistance, we are happy to talk on the phone. Call us at 1-833-787-4777 between 9 am - 5 pm PST Monday - Friday. You can also email us at [email protected] or text us at 702-659-7022. A link to our full contact us page is here.
Disclaimer: This post is intended for informational purposes only. It is not a substitute for professional medical advice, diagnosis, or treatment. Always consult your doctor or another qualified health provider with any questions you may have regarding a medical condition or before starting any new treatment. Do not disregard professional medical advice or delay in seeking it because of something you have read in this post.
FAQs
What does E1 mean on the Contour Next One Meter?
E1 means you didn’t apply enough blood to the strip. Use a new strip and ensure you provide a full sample when prompted.
What causes the E2 error on the Contour Next One?
E2 indicates the strip was previously used or damaged. Always insert a fresh, unused Contour Next test strip.
How do I fix the E8 error code?
E8 is a general testing or strip error. Try again with a new strip. If the problem continues, restart the meter or contact support.
What does E20 mean on the Contour Next One Meter?
E20 is a general testing error. Remove the strip, insert a new one, and test again. If it repeats, restart the meter.
What does E24 or E27 mean?
These mean the environment is too cold. Let the meter, strip, and control solution warm up for 20 minutes before testing again.
What does E28 mean?
E28 means it’s too hot to test. Move to a cooler environment and wait 20 minutes before retrying.
What does E3 mean on the meter?
E3 indicates the strip was inserted upside down. Remove and reinsert the strip with the contact bars facing up.
What does E4 mean on the Contour Next Meter?
E4 means you used the wrong type of test strip. Make sure you're using Contour Next test strips only.
What does E64 mean?
E64 may indicate a communication issue between the strip and the meter. Try a new strip and clean the strip port if needed.
What do E30 to E99 error codes mean?
These codes typically signal a system malfunction. Turn the meter off and back on. If the issue persists, call Ascensia Customer Support at 1-800-348-8100.